SETPEND3=0, SETPEND15=0, SETPEND18=0, SETPEND9=0, SETPEND31=0, SETPEND29=0, SETPEND24=0, SETPEND22=0, SETPEND8=0, SETPEND2=0, SETPEND27=0, SETPEND0=0, SETPEND21=0, SETPEND5=0, SETPEND12=0, SETPEND17=0, SETPEND13=0, SETPEND10=0, SETPEND6=0, SETPEND30=0, SETPEND26=0, SETPEND19=0, SETPEND28=0, SETPEND20=0, SETPEND23=0, SETPEND14=0, SETPEND1=0, SETPEND7=0, SETPEND11=0, SETPEND25=0, SETPEND16=0, SETPEND4=0
Interrupt Set Pending Register
| SETPEND0 | DMA channel 0 transfer complete and error interrupt set-pending bit 0 (0): write: no effect; read: DMA channel 0 transfer complete and error interrupt is not pending 1 (1): write: changes the DMA channel 0 transfer complete and error interrupt state to pending; read: DMA channel 0 transfer complete and error interrupt is pending |
| SETPEND1 | DMA channel 1 transfer complete and error interrupt set-pending bit 0 (0): write: no effect; read: DMA channel 1 transfer complete and error interrupt is not pending 1 (1): write: changes the DMA channel 1 transfer complete and error interrupt state to pending; read: DMA channel 1 transfer complete and error interrupt is pending |
| SETPEND2 | DMA channel 2 transfer complete and error interrupt set-pending bit 0 (0): write: no effect; read: DMA channel 2 transfer complete and error interrupt is not pending 1 (1): write: changes the DMA channel 2 transfer complete and error interrupt state to pending; read: DMA channel 2 transfer complete and error interrupt is pending |
| SETPEND3 | DMA channel 3 transfer complete and error interrupt set-pending bit 0 (0): write: no effect; read: DMA channel 3 transfer complete and error interrupt is not pending 1 (1): write: changes the DMA channel 3 transfer complete and error interrupt state to pending; read: DMA channel 3 transfer complete and error interrupt is pending |
| SETPEND4 | Reserved iv 20 interrupt set-pending bit 0 (0): write: no effect; read: Reserved iv 20 interrupt is not pending 1 (1): write: changes the Reserved iv 20 interrupt state to pending; read: Reserved iv 20 interrupt is pending |
| SETPEND5 | FTFA command complete and read collision interrupt set-pending bit 0 (0): write: no effect; read: FTFA command complete and read collision interrupt is not pending 1 (1): write: changes the FTFA command complete and read collision interrupt state to pending; read: FTFA command complete and read collision interrupt is pending |
| SETPEND6 | low-voltage detect and low-voltage warning interrupt set-pending bit 0 (0): write: no effect; read: low-voltage detect and low-voltage warning interrupt is not pending 1 (1): write: changes the low-voltage detect and low-voltage warning interrupt state to pending; read: low-voltage detect and low-voltage warning interrupt is pending |
| SETPEND7 | low leakage wakeup interrupt set-pending bit 0 (0): write: no effect; read: low leakage wakeup interrupt is not pending 1 (1): write: changes the low leakage wakeup interrupt state to pending; read: low leakage wakeup interrupt is pending |
| SETPEND8 | inter-integrated circuit 0 interrupt set-pending bit 0 (0): write: no effect; read: inter-integrated circuit 0 interrupt is not pending 1 (1): write: changes the inter-integrated circuit 0 interrupt state to pending; read: inter-integrated circuit 0 interrupt is pending |
| SETPEND9 | inter-integrated circuit 1 interrupt set-pending bit 0 (0): write: no effect; read: inter-integrated circuit 1 interrupt is not pending 1 (1): write: changes the inter-integrated circuit 1 interrupt state to pending; read: inter-integrated circuit 1 interrupt is pending |
| SETPEND10 | serial peripheral interface 0 interrupt set-pending bit 0 (0): write: no effect; read: serial peripheral interface 0 interrupt is not pending 1 (1): write: changes the serial peripheral interface 0 interrupt state to pending; read: serial peripheral interface 0 interrupt is pending |
| SETPEND11 | serial peripheral interface 1 interrupt set-pending bit 0 (0): write: no effect; read: serial peripheral interface 1 interrupt is not pending 1 (1): write: changes the serial peripheral interface 1 interrupt state to pending; read: serial peripheral interface 1 interrupt is pending |
| SETPEND12 | UART0 status and error interrupt set-pending bit 0 (0): write: no effect; read: UART0 status and error interrupt is not pending 1 (1): write: changes the UART0 status and error interrupt state to pending; read: UART0 status and error interrupt is pending |
| SETPEND13 | UART1 status and error interrupt set-pending bit 0 (0): write: no effect; read: UART1 status and error interrupt is not pending 1 (1): write: changes the UART1 status and error interrupt state to pending; read: UART1 status and error interrupt is pending |
| SETPEND14 | UART2 status and error interrupt set-pending bit 0 (0): write: no effect; read: UART2 status and error interrupt is not pending 1 (1): write: changes the UART2 status and error interrupt state to pending; read: UART2 status and error interrupt is pending |
| SETPEND15 | Analog-to-digital converter 0 interrupt set-pending bit 0 (0): write: no effect; read: Analog-to-digital converter 0 interrupt is not pending 1 (1): write: changes the Analog-to-digital converter 0 interrupt state to pending; read: Analog-to-digital converter 0 interrupt is pending |
| SETPEND16 | Comparator 0 interrupt set-pending bit 0 (0): write: no effect; read: Comparator 0 interrupt is not pending 1 (1): write: changes the Comparator 0 interrupt state to pending; read: Comparator 0 interrupt is pending |
| SETPEND17 | Timer PWM module 0 interrupt set-pending bit 0 (0): write: no effect; read: Timer PWM module 0 interrupt is not pending 1 (1): write: changes the Timer PWM module 0 interrupt state to pending; read: Timer PWM module 0 interrupt is pending |
| SETPEND18 | Timer PWM module 1 interrupt set-pending bit 0 (0): write: no effect; read: Timer PWM module 1 interrupt is not pending 1 (1): write: changes the Timer PWM module 1 interrupt state to pending; read: Timer PWM module 1 interrupt is pending |
| SETPEND19 | Timer PWM module 2 interrupt set-pending bit 0 (0): write: no effect; read: Timer PWM module 2 interrupt is not pending 1 (1): write: changes the Timer PWM module 2 interrupt state to pending; read: Timer PWM module 2 interrupt is pending |
| SETPEND20 | real time clock alarm interrupt set-pending bit 0 (0): write: no effect; read: real time clock alarm interrupt is not pending 1 (1): write: changes the real time clock alarm interrupt state to pending; read: real time clock alarm interrupt is pending |
| SETPEND21 | real time clock seconds interrupt set-pending bit 0 (0): write: no effect; read: real time clock seconds interrupt is not pending 1 (1): write: changes the real time clock seconds interrupt state to pending; read: real time clock seconds interrupt is pending |
| SETPEND22 | periodic interrupt timer all channels interrupt set-pending bit 0 (0): write: no effect; read: periodic interrupt timer all channels interrupt is not pending 1 (1): write: changes the periodic interrupt timer all channels interrupt state to pending; read: periodic interrupt timer all channels interrupt is pending |
| SETPEND23 | integrated interchip sound 0 interrupt set-pending bit 0 (0): write: no effect; read: integrated interchip sound 0 interrupt is not pending 1 (1): write: changes the integrated interchip sound 0 interrupt state to pending; read: integrated interchip sound 0 interrupt is pending |
| SETPEND24 | universal serial bus on the go interrupt set-pending bit 0 (0): write: no effect; read: universal serial bus on the go interrupt is not pending 1 (1): write: changes the universal serial bus on the go interrupt state to pending; read: universal serial bus on the go interrupt is pending |
| SETPEND25 | digital-to-analog converter 0 interrupt set-pending bit 0 (0): write: no effect; read: digital-to-analog converter 0 interrupt is not pending 1 (1): write: changes the digital-to-analog converter 0 interrupt state to pending; read: digital-to-analog converter 0 interrupt is pending |
| SETPEND26 | touch sensing input interrupt set-pending bit 0 (0): write: no effect; read: touch sensing input interrupt is not pending 1 (1): write: changes the touch sensing input interrupt state to pending; read: touch sensing input interrupt is pending |
| SETPEND27 | multipurpose clock generator interrupt set-pending bit 0 (0): write: no effect; read: multipurpose clock generator interrupt is not pending 1 (1): write: changes the multipurpose clock generator interrupt state to pending; read: multipurpose clock generator interrupt is pending |
| SETPEND28 | Low-Power Timer interrupt set-pending bit 0 (0): write: no effect; read: Low-Power Timer interrupt is not pending 1 (1): write: changes the Low-Power Timer interrupt state to pending; read: Low-Power Timer interrupt is pending |
| SETPEND29 | Reserved iv 45 interrupt set-pending bit 0 (0): write: no effect; read: Reserved iv 45 interrupt is not pending 1 (1): write: changes the Reserved iv 45 interrupt state to pending; read: Reserved iv 45 interrupt is pending |
| SETPEND30 | PORTA pin detect interrupt set-pending bit 0 (0): write: no effect; read: PORTA pin detect interrupt is not pending 1 (1): write: changes the PORTA pin detect interrupt state to pending; read: PORTA pin detect interrupt is pending |
| SETPEND31 | PORTC and PORTD pin detect interrupt set-pending bit 0 (0): write: no effect; read: PORTC and PORTD pin detect interrupt is not pending 1 (1): write: changes the PORTC and PORTD pin detect interrupt state to pending; read: PORTC and PORTD pin detect interrupt is pending |